1. Specification of 1.6w ULP Ultra low power foldable portable solar panel
Model | Monocrystalline silicon ultra low power Solar panel 1.6w/5v |
Working Model | 1*10pcs series connectioin |
Output Power | 1.6±0.1W |
Working Voltage(with cable Vm) | Vm ≥ 5.0V |
Working Current(with cable Im) | Im ≥ 300mA |
Open circuit Vol. | Voc ≥ 6.0V |
Short circut Current(Isc) | Isc ≥ 325mA |
Conver efficient | ≥19.8% |
Solar panel Size | 138.2*82.2*2.2 ±0.3mm |
Panel with housing Size | 141*85*12mm |
Gross Weigth | 0.15KG |
Cable | White, Diameter 26AWG, length:3m , MICRO or Type-C connection at the end, or other customized connector |
EVA | 0.4mm/0.45mm |
Frosted PET | 0.2mm |
Photovoltaic welding zone | 0.08*0.8mm |
Black adhesive zone | width 4.0mm |
PCB Module | 1.0mm Fiberglass board |
2.Test environment(STC) of 1.6w ULP Ultra low power foldable portable solar panel
1. The Sample is tested by standard PV module tester
2. spectral energy: 1KW/㎡,
3. Air pressure:AM=1.5
4. Temperature: 25℃
3. Advantages of 1.6w ULP Ultra low power foldable portable solar panel
(1) IP64
(2) Ultra low power
(3) Two choices of the holder: 99.3*55.4mm(M2)/107*70mm(XXR-618)
4. Power testing of 1.6w ULP Ultra low power foldable portable solar panel
1. Turn the light same as customers requirement enviroment.
2. Using electronic load meter to test ULP portable solar panel with cable. When Voltage=5.0V, output≥ 1.6w, then it’s qulified.
3. The light intensity is corrected every 2 hours.