ECJET series printer operation manual v1.5 high resolution printer with touch screen developed on HP print tech

• Printer introduction

ECJET is high resolution printer with touch screen developed on HP print tech, featured as high resolution and high print speed. It can control 1-4 print heads. It can print variable data including text, batch number, manufacture& expiry date and image, matching with various kinds of production lines.

Operation interface with 7 inch touch screen make it easier to operate.

High system integration, small size, less component and easy to install and maintain. Full metal shell, industrial design and is much stronger.

Take HP original driving board to make print effect higher quality Wireless print head verify tech , more stable and intelligent.

Parts

Main parts of ECJET include: main engine, print head ,sensor, synchronizer( optional)

Main engine

Positive image:

Instruction image of the back serial port

Sensor interface (SENSER): When inspect print object, sensor will send trigger signal to SMARTJET. SMARTJET will control the print head to print according to the signal received. The location and sensitivity of sensor will affect print effect.

Warning light interface (ALARM): Warning light will indicate present print status or error status.

Print head

If customer needs to separate the 4 print heads that are joint together to four separate print heads, customer only needs to buy four paper deflector of single print head. It is the same situattion for other joint and separate print heads.

Single print head Two joint print heads Four joint print heads

Attention: print head needs to use specified connection cable. And there is red and blue indication light in each print head

USB interface: users can insert U-disk to input word stock fill.

Print interface: Connect 1-4 print heads by print cables.

​Application: