KE8302M-1000 is used for testing and calibration of single / three phase clamp CT meter, including on-site installed meter and portable standard meter.
KE8302-1000-3 | KE8302-1000-6 | |
Number of meter position | 3 | 6 |
Accuracy | ± 0.05% | |
Voltage output | ||
Output range (P-N) | 3×(24V - 300V) | |
Output power of voltage | 3×100VA | 3×200VA |
Resolution | Better than ± 0.01% | |
Stability | Better than ± 0.02% / 150s | |
Load regulation rate | Better than ± 0.01% | |
Distortion factor | Better than ± 0.3% (linear resistance load) | |
Harmonics output | 2nd -21st free programmable | |
Current output | ||
Output range | 3×(0.5A - 1000A) | |
Output power of current | 3×400VA | 3×800VA |
Resolution | Better than ± 0.01% | |
Stability | Better than ± 0.02% / 150s | |
Load regulation rate | Better than ± 0.01% | |
Distortion factor | Better than ± 0.3% (linear resistance load) | |
Harmonics output | 2nd -21st free programmable | |
Phase output | ||
Output range | 0 -- 360° | |
Resolution | ± 0.01° | |
Frequency output | ||
Output range | 45Hz - 65Hz | |
Resolution | ± 0.01Hz | |
Operation conditions | ||
Power supply | 3×220/380V±10% ,50/60Hz±2Hz | |
Temperature | -10°C -- +40°C | |
Humidity | 35% -- 85%RH |