Aluminum Alloy 80km/H Buzzer Absorb The Impact Force Truck Mounted Attenuator

The tractor is installed at the rear of the road maintenance vehicle and is mainly suitable for temporary road safety maintenance construction. The vehicle installed with this device is parked behind the construction work area to absorb the impact of the vehicle due to rear-end collision. So as to protect the safety of the work area.

The exterior of the product is yellow electrostatic spraying, the yellow body is matched with red and white warning strips, bright LED arrows, and the yellow warning buzzer on the top can bring a good warning effect to the driver. When the driver accidentally hits the device, the internal special aluminum structure of the absorption part can absorb a large amount of impact with its unique shock absorption design, minimize the accident damage, and achieve the effect of protecting the safety of people and vehicles. If the deformation is not serious, the repair work can be easily completed by replacing the internal absorbent material.

Although the volume of the device is relatively large, the structure design is reasonable. The bottom of the device is equipped with wheels, as long as it is fixed behind the construction vehicle, it can be easily taken away. The device comes with an LED direction arrow, which can switch the direction at will, and it can also remind the rear driver to pay attention to the construction vehicle in the case of low visibility. The arrow board part can be raised and lowered. When not in use, it can be stored to save storage space.

Product advantages

1. This Truck Mounted Attenuator is equipped with warning light and LED light guide arrow plate, which can play a good warning effect in bad weather conditions. LED arrow board can adjust the direction, indicating more convenient.
2. The Truck Mounted Attenuator has large volume and high stability.
3. The Truck Mounted Attenuator is equipped with wheels, which is easy to carry. It can be hung behind the construction vehicle and move at high speed.
4. The inner part of the absorption device is our exclusive aluminum profile, which has strong absorption capacity and is easy to repair.
5. The red and white reflective warning film has obvious warning effect.
6. The arrow plate has the function of lifting and lowering, which can be put away when not in use. It's very simple to operate.
7. With beep warning device, it can alarm in emergency.

Structural drawing of the product

The picture shows the internal absorption material developed by our company, which has high shock absorption capacity. It has obtained an invention patent (patent number: ZL 2006 1 0057817.8), and has passed safety tests overseas and officially adopted it. The profile is a recyclable and environmentally friendly product.