Working Principle
Charging: The powder particles are charged as they pass through the spray gun.
Spraying: The charged powder is sprayed onto the grounded workpiece, where it is attracted and adheres to the surface.
Curing: The coated workpiece is heated in an oven, causing the powder to melt, flow, and chemically cure, resulting in a tough, even finish.
No | Item | Data | | |
1 | Voltage | 110v/220v | | |
2 | Frenquency | 50/60HZ | | |
3 | Input power | 50W | | |
4 | Max. output current | 200ua | | |
5 | Output power voltage | 0-100kv | | |
6 | Input Air pressure | 0.3-0.6Mpa | | |
7 | Polarity | Negative | | |
8 | Gun weight | 480g | | |