ABS-DA powder metering machine air conveying metering type

Production introduction:

ABS-DA powder metering machine (air conveying metering type) is mainly suitable for one- and two-story structure workshops, in which large materials are conveyed and measured by negative pressure suction. Meet the requirements of the internal mixer/kneader host for the feeding, dust removal, transportation, storage, batching and weighing of various raw materials, and realize the linkage control with the internal mixer and the kneader.

The system is mainly divided into three parts: raw material storage area, conveying pipeline and scale. The raw material storage area can be set in the raw material warehouse to isolate the raw material area from the production area, so that there is no dust pollution in the production area; the scale has the functions of raw material transportation, measurement, operation management, etc., and the operator can go through the man-machine interface or industrial control in advance Once the formula and batch are set, the scale can automatically convey and measure the raw material formula.

This system can measure up to 12 kinds of powder and granular raw materials, and the accuracy of the measuring range of the powder and granular raw materials with good fluidity is ±200g to 0.5% F.S. when the measuring range is 10kg to 200kg. Mainly used in the production of rubber products, plastic products, cable materials, food, chemical raw materials and other products.

Features:

1. The system occupies a small space, which can reduce the space occupation by 50% compared with other traditional auxiliary machines, thereby saving 50% of the construction cost;

2. The raw material area is separated from the production area, and the equipment investment for the combination of vacuum conveying raw materials and weighing scales is reduced by 30%, saving labor costs for handling raw materials, and no dust pollution; multi-line sharing raw material barrels can save equipment investment costs;

3. Design scales according to the unique needs of customers to ensure better applicability;

4. Use wind pressure to change the material flow rate, multi-stage feeding and over protection parameter settings to ensure high precision measurement.