P4 2 X 700W Class H stage Power Amplifier in Two Cooling Fans
Description
Sound Quality: For this Class H amplifiers aim to maintain good sound quality while improving efficiency. They strive to minimize distortion and provide a relatively linear amplification of the audio signals. However, the specific sound quality will depend on the design and implementation of the amplifier.
Power Output: In this power amplifiers are available in a range of power ratings, allowing them to be used in various applications. The power output is typically specified per channel and measured in watts, indicating the maximum power that can be delivered to the connected speakers or loads.
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Specifications | ||
Load Impedance | 4Ω | 8Ω |
Stereo Output | 2 X 1000W | 2 X 700W |
Bridge Output Power | 3000W | 2000W |
Input Impedance | 20K OHMS | |
Frequency Response | 10Hz-20KHz +/-1dB | |
Total Harmonic Distortion | <0.02% | |
Slew Rate | 40V/μS | |
Signal Noise Ratio | >105dB | |
Damp Modulus 8Ω | >250 | |
Output Category | ClassH | |
Cooling | Two Cooling Fans | |
Input Sensitivity | 0.75V | |
Input Voltage | 180V-240V | |
Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
Gross Weigh | 31KG | |
Packing Dimensions | 0.08m³ |