XL-1300 Power Amplifier with Unparalleled Singing Texture and Strong Voice Performance
Description
1, Impedance Matching: When connecting speakers to the amplifier, it's important to ensure that the impedance (measured in ohms) of the speakers matches the amplifier's output impedance. This helps optimize power transfer and prevent damage to the amplifier or speakers. Many stage power amplifiers can handle different speaker impedance loads, such as 4 ohms, 8 ohms, or even lower impedance loads.tiveness and practicality of products.
2, Input Connectivity: Stage power amplifiers typically offer a variety of input connectivity options to accommodate different audio sources. These can include XLR, 1/4-inch TRS, or RCA connectors. Balanced inputs, such as XLR, are often preferred for professional audio applications as they help minimize noise and interference.
Quick Detail
Model | XL-1300 | |
TA 1KHz THD≤1% Stereo Power | 8 OHMS | 2×1300W |
4 OHMS | 2×1750W | |
TA 1KHz THD≤1% Bridge Mono Power | 8 OHMS | 3500W |
Frequency Response | 10Hz-50KHz-1.5dB | |
Noise A-weighting | >100dB | |
Damping Coefficient | >200 | |
Maximum Input Level | 21dBV/9V | |
Slew Rate | ≥35V/μS | |
Channel Separation | >70dB | |
Input Sensitivity | 0.77V/1V/1.4V | |
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS | |
Output Type | Class A | |
Power Dissipation (half-power,8 OHMS) | <1600W | |
Power Source | 220V-240V/50Hz | |
Cooling | Two variable speed fans | |
Protection | DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting | |
Display | Power light (green), Protection light (red), Overload light (yellow), Signal light (green) | |
Input | Balanced input | |
Output | Professioanl binding post outputs | |
Panel Control | Left and right channel volume control, power switch control | |
Backplane Control |
Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch | |
Dimension (mm) | 482×429.5×88(mm) |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.