P5 2 X 900W Class H Stage Power Amplifier for input Voltage 180V-240V
Description
1. Amplification: The primary function of a power amplifier is to amplify the audio signal it receives. It takes a low-level input signal and increases its power level to a level suitable for driving speakers.
2,Power Output: Power amplifiers are rated based on their power output, typically measured in watts. The power output determines the amplifier's ability to drive speakers and deliver sound at a certain volume level. The power rating should be matched to the requirements of the speakers being used
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Specifications | ||
Load Impedance | 4Ω | 8Ω |
Stereo Output | 2 X 1400W | 2 X 900W |
Bridge Output Power | 3600W | 2800W |
Input Impedance | 20K OHMS | |
Frequency Response | 10Hz-20KHz +/-1dB | |
Total Harmonic Distortion | <0.02% | |
Slew Rate | 40V/μS | |
Signal Noise Ratio | >105dB | |
Damp Modulus 8Ω | >250 | |
Output Category | ClassH | |
Cooling | Two Cooling Fans | |
Input Sensitivity | 0.75V | |
Input Voltage | 180V-240V | |
Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
Gross Weigh | 35KG | |
Packing Dimensions | 0.08m³ |