P4000 2 X 700W Class H Stage Power Amplifier With Dynamic Thermal Management And LED Display
Description
1,power amplifiers has two fans to facilitate airflow and dissipate heat. Fans draw cool air into the amplifier and expel hot air generated by the internal components. They are typically strategically positioned to ensure efficient cooling and are controlled by temperature sensors or manual settings.
2,Thermal Management Systems: Advanced power amplifiers may incorporate sophisticated thermal management systems. These systems use temperature sensors and control circuits to monitor the amplifier's internal temperature and adjust cooling mechanisms accordingly. They can dynamically control fan speeds, optimize airflow, or activate additional cooling mechanisms based on real-time conditions.
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Specifications | ||
Load Impedance | 4Ω | 8Ω |
Stereo Output | 2 X 1000W | 2 X 700W |
Bridge Output Power | 3000W | 2000W |
Input Impedance | 20K OHMS | |
Frequency Response | 10Hz-20KHz +/-1dB | |
Total Harmonic Distortion | <0.02% | |
Slew Rate | 40V/μS | |
Signal Noise Ratio | >105dB | |
Damp Modulus 8Ω | >250 | |
Output Category | ClassH | |
Cooling | Two Cooling Fans | |
Input Sensitivity | 0.75V | |
Input Voltage | 180V-240V | |
Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
Gross Weigh | 31KG | |
Packing Dimensions | 0.08m³ |