P3 Class AB Professional Power Amplifier in 8Ω Stereo Output 2x450W
Description
1,Cooling and ventilation: Power amplifiers generate heat, especially when operating at high power levels. Ensure that the amplifier has proper ventilation and cooling to prevent overheating. Follow the manufacturer's guidelines for placement and ensure that there is adequate airflow around the amplifier.
2,Signal source quality: Use a high-quality signal source or preamplifier to provide a clean and balanced signal to the power amplifier. Poor signal quality can introduce noise, distortion, or other artifacts that can degrade the sound output.
Quick Detail
Specifications | ||
Load Impedance | 4Ω | 8Ω |
Stereo Output | 2 X 700W | 2 X 450W |
Bridge Output Power | 2300W | 1500W |
Input Impedance | 20K OHMS | |
Frequency Response | 10Hz-20KHz +/-1dB | |
Total Harmonic Distortion | <0.02% | |
Slew Rate | 40V/μS | |
Signal Noise Ratio | >105dB | |
Damp Modulus 8Ω | >200 | |
Output Category | ClassAB | |
Cooling | Two Cooling Fans | |
Input Sensitivity | 0.75V | |
Input Voltage | 180V-240V | |
Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
Dimensions (W x H x D), mm | 430mm*132mm*397mm | |
Gross Weigh | 23KG | |
Packing Dimensions | 0.07m³ |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.