High-Performance P5 2 X 900W Stage Power Amplifier for Audio Amplification Solutions
Detailed Features
Power Output:
Power ratings can vary significantly, often labeled as RMS (Root Mean Square) power, which provides a more accurate representation of continuous power output. For example, a 200W per channel amplifier can handle peaks above this rating without distortion.
Signal-to-Noise Ratio (SNR):
An important specification indicating the level of desired signal to the level of background noise. A higher SNR (typically above 90 dB) means cleaner sound with less interference.
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Specifications | ||
Load Impedance | 4Ω | 8Ω |
Stereo Output | 2 X 1400W | 2 X 900W |
Bridge Output Power | 3600W | 2800W |
Input Impedance | 20K OHMS | |
Frequency Response | 10Hz-20KHz +/-1dB | |
Total Harmonic Distortion | <0.02% | |
Slew Rate | 40V/μS | |
Signal Noise Ratio | >105dB | |
Damp Modulus 8Ω | >250 | |
Output Category | ClassH | |
Cooling | Two Cooling Fans | |
Input Sensitivity | 0.75V | |
Input Voltage | 180V-240V | |
Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
Gross Weigh | 35KG | |
Packing Dimensions | 0.08m³ |