Vacuum load-break switch-----Module C
● Standard Feature
(1) busbar, 630A
(2) vacuum load switch and operating handle
(3) disconnector / earthing switch and operating handle
(4) two independent operating shafts respectively for vacuum load-break switch and disconnector/earthing switch
(5) vacuum load-break switch, disconnector and earthing switch all have position indicators
(6) 630A European type cable bushing is arranged horizontally at the front part.
(7) capacitive voltage indicator and phase balance checker are integrated together and meet the standard of ISO61958 .
(8) operating hole of disconnector/ earthing switch has padlock device.
(9) earth busbar
● Optional Feature
(1) busbar extention for future
(2) motor for vacuum load-break switch
(3) motor for disconnetor / earthing switch
(4) fault indicators for short circuit and earthing
(5) ring core current transformer and current meter for measuring
(6) surge arrester or double cable terminals may be installed on incoming bushing
(7) auxiliary contact
---- load switch position 2NO+2NC
---- disconnector / Earthing switch position 2NO+2NC
(8) secondary device may be installed in low voltage compartment on the top of the cabinet
(9) shunt trip coil 110V/220V(DC or AC)