TJA1021T20CM 118 LIN Transceivers TJA1021 ISO 17987/LIN 2.x/SAE J2602 transceiver
General description
The TJA1021 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN.
It is primarily intended for in-vehicle sub-networks using baud rates from 1 kBd up to 20 kBd (/20 variant) and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 (12 V).
The TJA1021 is pin-to-pin compatible with the TJA1020 and MC33662(B).
The transmit data stream of the protocol controller at the transmit data input (TXD) is converted by the TJA1021 into a bus signal with optimized slew rate and wave shaping to minimize ElectroMagnetic Emission (EME).
The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, an external resistor in series with a diode should be connected between pin INH or pin VBAT and pin LIN.
The receiver detects the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller.
In Sleep mode, the power consumption of the TJA1021 is very low. In failure modes, the power consumption is reduced to a minimum.
Ordering information
Type number | Package | Description |
TJA1021T/10 | SO8 SOT96-1 | plastic small outline package; 8 leads; body width 3.9 mm |
TJA1021T/20 | SO8 SOT96-1 | plastic small outline package; 8 leads; body width 3.9 mm |
TJA1021TK/10 | HVSON8 SOT782-1 | plastic thermal enhanced very thin small outline package; no leads; 8 terminals; body 3 3 0.85 mm |
TJA1021TK/20 | HVSON8 SOT782-1 | plastic thermal enhanced very thin small outline package; no leads; 8 terminals; body 3 3 0.85 mm |
TJA1021T/10 and TJA1021TK/10: for the low slope version that supports baud rates up to 10.4 kBd (SAE J2602);
TJA1021T/20 and TJA1021TK/20: for the normal slope version that supports baud rates up to 20 kBd
Pinning information