Manufacturer's 5G Base Station Power Testing System, Charger/Power Bank/Mobile Power Supply Automatic Testing System

The power supply testing system consists of both hardware and software components. The hardware includes a computer, AC SOURCE, power meter, electronic load, digital oscilloscope, and test fixtures; the software component is the independently developed Topfer V4.1 by Chuangrui. It connects and communicates with the other hardware through USB and USB/GPIB conversion interfaces, coordinating the operation of each device, collecting and processing data, and finally generating test reports.

To achieve an intelligent design for the power supply testing system, all the aforementioned devices—AC SOURCE, power meter, oscilloscope, and electronic load—must have communication interfaces, meaning they can connect to a computer and be controlled via programs. The power supply testing system can be customized based on the customer’s actual conditions: factors such as required precision and cost-performance ratio can serve as the basis for selection. If the customer already owns individual units (such as AC SOURCE, power meter, oscilloscope, and electronic load) that are programmable, these can be integrated into the Chuangrui power supply testing system. This way, while ensuring effective testing results, it reduces the customer's expenses and minimizes waste from adopting new equipment at the expense of underutilizing existing ones.

Open:

• An open hardware platform that allows for the addition or removal of various testing devices based on customer requirements (including devices with GPIB, RS-232, USB, and other interfaces)
• An open software platform that can be expanded with new test items and functions according to customer testing needs
• Supports simultaneous multi-lane barcode pre-scanning functionality, as well as scanning barcodes during testing, enhancing overall test speed."

Universal:

• Supports comprehensive testing for various power supplies (adapters/chargers, LED power supplies, PC power supplies, inverters, communication power supplies, etc.)!
• Complies with Energy Star and IEC 62301 measurement requirements
• Supports Manufacturing Information System (ShopFloor) interface
• Supports testing of various power supply parameters in CV, CC, CR, CP modes
• Optimized display mode, arbitrary hardware configuration combinations"

High-Speed:

• Supports simultaneous testing of multiple single-output or multiple multi-output power supplies, significantly increasing production line capacity. (The testing speed for adapters/chargers/LED power supplies is more than double that of the widely used 6000 series power supply automation systems.)
• Conducts parallel barcode scanning during testing (Bar Code Reader), greatly improving testing speed.

Test Items of the Charger/Power Bank/Mobile Power Supply Automatic Testing System: