RJ45 interface network power supply lightning protection signal protection surge protector

Model:Trss-rj11 / 45

colour:white

Authentication: CE ECM

Product Details

TRSS-RJ45/8 type network lightning arrester is suitable for railway communication system, mobile base station, differential station, hard disk recorder, video surveillance equipment, optical terminal and other network transmission equipment to avoid overvoltage damage such as inductive lightning stroke and electrostatic discharge introduced by the system. The grounding point is treated by special process to avoid signal interference. It adopts multi-level protection circuit, low residual pressure level and good protection effect.
The lightning arrester adopts the multilevel protection circuit, selects the world famous brand components, and makes use of the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.

Use of attention

1. dentify the input / output interface identifier of the lightning protector, input the external line and output the connection device.

2. The grounding wire should be short, thick and straight, so as to reduce the influence of distributed inductance on the ability of lightning electromagnetic pulse.

3. The grounding of the signal protector should be connected to the grounding grid through the electronic switch.

4. The lightning protector is connected between the protected device and the signal channel in series.

5. The input port (IN) of the lightning protector is connected to the signal channel, and the output terminal (OUT) is connected with the input end of the protected device, so it cannot be connected to the reverse side.

Product features

1. Greater traffic flow to improve safety

2. Limit the precision of the voltage.

3. The installation and use of convenient novice can also be installed easily

4. Strict product structure, meticulous and comprehensive protection

5. PCB is designed with microstrip, good isolation, low line disturbance

Product specification

Working principle of product

The principle of lightning arrester is to present a high resistance open state with a low pressure, low resistance and short circuit state at high pressure, and a combination of over voltage protection electronic devices which can withstand hundreds of amperes and large current in parallel on the power supply line and signal transmission line. When encountering lightning and high voltage and high current, it will appear short circuit immediately, and at the same time, the total power switch will be disconnected, so that the computer equipment will be protected.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.
All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.