275v power surge protector, 1P lightning protection circuit breaker, 80KA home protection switch.

Working principle of product

Surge protector not only can be used to protect the high voltage of the atmosphere, but also to protect the operation of high voltage.
If there is a thunderstorm, a high voltage will appear and the electric equipment may be dangerous. At this point, the arrester will play a role to protect the power equipment from damage. The most important function of the arrester is to limit the overvoltage to protect the electrical equipment. Lightning arrester is a device to make the lightning current flow into the earth, so that the electrical equipment does not generate high voltage.

Product specification

Product features

1. self protection voltage is more than self protection, automatic disconnection and recovery.

2. new technology, high energy, gap discharge electrode N-PE.

3. copper fittings have good electrical conductivity

Notice of product

1. connect the grounding wire of the lightning protector with the ground wire of the lightning protection system.

2. it should match the working voltage of the protected equipment. Please install according to the installation sketch.

3. ambient air temperature is no more than +40 C and no less than -5 C, and the average value of 24 hours is no more than +35 C.

Product Details

Surge protector is the lightning protection measures taken by Zhejiang toer Electric Co., Ltd. for the electrical system. It mainly plays the role of protecting the line from lightning protection and overvoltage protection.
The circuit protection is made up of a powerful diode solid state discharge tube; basic and fine protection is based on automatic fault protection device technology. In thermal overload, the device moves the two ends of the original lightning protection together, thus causing the damage of the surge.

Product packaging:Carton packing

Transportation method

1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport