LED lamps and lanterns, lighting protector, street lamps, surge lamps, lighting lamps, lightning arresters

Brief introduction

This product is specially designed for lightning protection of LED street light equipment. This component has good lightning protection performance, safety regulation performance and special structural requirements. It can meet the lightning protection requirements of LED power supply system.

Product specification

Working principle of product

When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Product features

1. installation is easy and easy to use

2. core components use brand components

3. exquisite workmanship, able to work in bad environment for a long time.

Use of attention

1. recognition interface and connection mode

2. grounding lines should be short, thick and straight, so as to reduce the influence of distributed inductors on the ability of lightning electromagnetic pulse.

3. after correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.

Product packaging:Carton packing

Transportation method

  1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport