Series and parallel waterproof LED street lamp 10KV withstand voltage protector and lightning protector

Brief introduction

LED lamp surge protector is a product designed for LED power supply system based on relevant standards. It is installed in the lampshade of LED lamps or in the control cabinet. It is applied to many outdoor lighting systems such as LED street lamp, tunnel lamp, outdoor landscape lamp and so on. Different versions of the design are mainly to meet the different lines, divided into line connection and terminal connection two wiring ways, some versions also equipped with signal (DALI, RS485, 0-10V) protection function, mainly to meet the monitoring and regulation function of the LED lighting system.

Product features

1. can realize water release and explosion-proof

2. high precision constant current output

3. with the power status indication, indicating the working state of surge protector.

Product specification

1.Rated Operating Voitage(UC):275V

2. Voltage protective level(UP):0.8KV

3. Max discharge current(IMAX):6KA

4. Nominal discharge current(IN):3KA

Working principle of product

When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Use of attention

1. determine the discharge current path

2. torpedo must be disconnected when installing and maintaining, and no live operation is strictly prohibited. Y is in case of electric shock.

3. after correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Product packaging:Carton packing

Transportation method

1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport