Cat.5 Cat.5e and Cat.6 Universal Network Surge Protector Maintain network speed and stability

Model: TRSS-RJ11 / 45

Color: white

Authentication: CE ECM

Product description

TRSS-RJ45/8 type network lightning arrester is a lightning protection measure taken by Zhejiang tohr Electric Co., Ltd. to independently develop and manufacture the network system.
It is mainly used for lightning protection measures against network system. It is an important manifestation of internal lightning protection. In view of the characteristics of the network system, the selection of high quality and low capacitance gas discharge tube, TVS and other devices has the advantages of small insertion loss, fast response speed, accurate clamping, low output pressure and so on.

Product features

1. Greater traffic flow to improve safety

2. PCB is designed with microstrip, good isolation, low line disturbance

3. Advanced production technology and beautiful appearance

4. The transmission distance can be transmitted by 100m!

Product specification

Working principle of product

The lightning arrester can effectively protect the power equipment. Once the abnormal voltage appears, the lightning arrester will play a protective role. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.

Use of attention

1. The grounding wire should be short, thick and straight, so as to reduce the influence of distributed inductance on the ability of lightning electromagnetic pulse.

2. The input port (IN) of the lightning protector is connected to the signal channel, and the output terminal (OUT) is connected with the input end of the protected device, so it cannot be connected to the reverse side.

3. The lightning protector of the network switch should match the working voltage of the protected device. When installing, please connect according to the installation sketch map.

4. There is no special maintenance for this product. The lightning arrester should be checked regularly, especially in the thunderstorm season and the whole thunderstorm period. When the system fails to doubt the lightning arrester, the lightning arrester can be dismantled and rechecked. If the system is restored to normal after the restoration to the state before use, it indicates that the lightning arrester has been damaged and must be replaced immediately.

Product packaging:Carton packing

Transportation method

  1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport