Light indicates lightning protection device High voltage arrester

Product description

Surge protector is the lightning protection measures taken by Zhejiang toer Electric Co., Ltd. for the electrical system, which is used to prevent lightning from the circuit system. The important performance of internal lightning protection is suitable for household housing, the third industry and industrial equipment, so that it is free from overvoltage damage such as inductive lightning and electrostatic discharge introduced by the system. The grounding point is treated by special process to avoid signal interference. The multi-stage protection circuit has the advantages of small insertion loss, fast response speed, accurate clamping, low output residual voltage and so on.

Product features

1. with the power status indication, indicating the working state of surge protector.

2. core components are strictly screened, stable performance and reliable operation.

3. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

Product specification

Working principle of product

In the equipment system, the inductive or capacitive coupling voltage is caused by the lightning shock and the switching operation of the upstream power supply system. Therefore, the surge may damage the photovoltaic modules and inverters and other devices. This will cause serious consequences for the operation of the system. The surge protector is a DC power defense specially designed for this purpose. The lightning module, once the high voltage, and endanger the insulation of the protected equipment, the lightning arrester acts immediately, the high voltage impact current guide the earth, thus limiting the voltage amplitude, protecting the insulation of the equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so as to protect the power equipment.

Use of attention

1. lightning protector's input port (IN) is connected to the signal channel, and the output terminal (OUT) is connected with the input end of the protected device, so it can't connect with the signal.

2. data line: more than 2.5mm2; when the length of more than 0.5 meters of more than 4mm2

3. needs to carry out the energy coordination of multilevel SPD

Product packaging: Carton packing

Transportation method

1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport