PDU cabinets for power socket Aluminum Alloy 8 row wire lightning protection engineering

Product introduction

The PDU lightning protection socket has the anti lightning protection function, effectively absorbs the surge pulse from the power supply system, and ensures the safe use of the electric appliance in the bad environment and the multi mine area. It is widely used in electronic equipment, electronic and electrical appliances. Lightning protection sockets will quickly absorb the lightning and surge pulse of the power supply system; the office and household appliances will not be infringed by the surge current and reduce the probability of damage by lightning in the lightning environment.

Product specification

1.Rated Operating Voitage(UC): 250V～

2.Voltage protective level(UP):1.0KV

3. Max discharge current(IMAX):6KA

4. Nominal discharge current(IN):3KA

5. Protection mode: L-N

6. technical parameter: MAX2.5KW-MAX10A

Working principle of product

The surge protector of PDU lightning protection socket is very high when no voltage is needed, which is equivalent to breaking circuit. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Product features

1. the inner sleeve is made of all phosphorus bronze strip, with good conductivity and elasticity.

2. Internal and external shell adopts flame retardant material, open fire blocking and high temperature resistance performance, material safety and environmental protection.

3. RFI/EMI filter circuit can absorb the surge of radio frequency / electromagnetic interference and output pure power.

Use of attention

1. when the ground wire end connected to the lightning protection socket meets the requirements, the plug plug can be inserted directly; otherwise, the grounding terminal of the lightning protection socket must be connected with the ground net to use. In order to achieve better lightning protection effect, it is recommended that the earthing terminals of the lightning protection socket be connected to the ground network reliably.

2.The grounding screw with 2.5m square meters above ground wire is connected to the power supply socket type surge protector on;

3. under special conditions, the ground electrode Pin on the product power plug can be used as the grounding electrode.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.