BNC monitoring signal, multi interface lightning arrester, control signal, lightning protection, surge prevention.

Product description

The control signal lightning arrester is a lightning protection measure developed by Zhejiang tohr Electric Co., Ltd., which is independently developed for signal circuit protection. The effect of the control signal lightning arrester is that when the transmission line is impacted by the inductive thunder and other transient overvoltages, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, which can effectively prevent this situation and ensure the safety of the equipment.

Product features

1. low insertion loss to ensure unblocked lines

2. the low attenuation and return loss in the wide frequency range ensure that the lightning arrester does not affect the system performance.

3. core components are strictly screened and their performance is superior.

Product specification

Working principle of product

The control signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.

Use of attention

1. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.

2. when installing, make sure that the "one" screw is installed in place, making the line combination firmly. If the installation is finished, the multimeter can be used to test whether the signal lines are connected. Do not install SPD on live line, otherwise it may damage SPD and equipment to be protected.

3. connect protectors to the front-end of the protected devices, and connect them reliably.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.
Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.

Product packaging:Carton packing

Transportation method

  1. Express company: FEDEX,UPS,DHL,TNT

2. Trains, ships, aircraft transport