Because the system has passed the original protocol, there is no need to be cracked and modified when the electric rear door is remodeled. It can be compatible with the key of the original car, the tail door can be opened directly by the control of the original car, It can also be opened through the rear box key on the vehicle dashboard, there will be a key at the end of the door, by this button, the tail door can also be automatically closed.
In addition to the above manipulation, this intelligent electric tail door also supports”one foot kick”,when you kick your foot to the corresponding sensing area at the bottom of the tail door, the tail door can be opened automatically, it is not convenient for manual or electric vehicle keys when used for too many objects.
Intelligent electric tail door for pneumatic support of standard plant.Even if you operate the tail door manually,It will not cause any damage to the electric pole.
High memory can be used according to the habits or height characteristics of vehicle owners,The opening height of the tail door can be set arbitrarily ,The system has the function of intelligent learning and memory, which can be customized flexibly.
The biggest safety problem of the traditional tailgate is that it is easy to clip or hurt drivers,Qualified products should have intelligent detection obstacles and realize emergency braking function,for example,When the tail door opens, obstacles can stop immediately. KaiMiao has this products which is a set of intelligent systems, When it works well,No matter whether the tail door is open or closed, if a part of the body is near the tail door or something else touches the power liftgate, The tail door will be stopped immediately,Prevent people from being crushed or bruised
This electric tail door will give a sound reminder during the opening and closing process. There will be a corresponding reminder after the end of the operation,If it is in the course of a vehicle,The tail door was opened for failure, You can also detect it and turn it off by wireless remote control at the first time.
Electric tail door with an electric suction device,At the last minute of closing, the tail door can be automatically drawn and locked.This is safer and more intelligent than traditional inertial mechanical closing.
As the control core of the electric tailgate system, the control box provides suitable power for the electric struts on both sides when the tailgate is running in automatic mode, and at the same time judges whether anti-pinch occurs during operation. When the electric suction lock is driven to enter the half-lock position, the locking operation and the unlocking operation when the tailgate is opened are performed. The ECU can monitor other components of the system and provide system diagnostic information.
Test | Description |
Water-Proof Test | Perform IPX4 waterproof rating standard, put the poles in the car, dripping for 10 minutes, flusing for many times. |
Salt Spray Test | Place the poles in 5% NACL solution of salt spray for 256 hours, wash the solution with flowing water, rinse with distilled water, stand it for 1-2 hours. Finally check if the pole is rusty. |
High Temperature Test | Double pole load balancing. When a pole fails, the door can be prevented from being deformed. When the tailgate fails in a special scene, the system will automatically adjust the closing effort. |
Low Temperature Test | When the drive circuit is faulty( low-voltage alarm, over-current protection), it will automatically cut off / automatically recover to ensure the safety of vehicles and equipment. |
High and Low Temperature | Ultra-low quiescent current(Standby Current:1 mA). It can avoid that the vehicle can not start without power due to long-term parking. |
Q1. What are your terms of packing?
A: Generally, we pack our goods in carton box, suitable for shipping container.
Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your parameters.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the sample fee is required.
Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery. Our products have over 800 tests to assure quality.
Q7: How do you make our business long-term and good relationship?
A1:We keep excellent quality, thoughtful after-sales service and competitive price to ensure our customers’ benefit; A2:We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.