Hexagonal DTRO Membrane Welding Machine Octagonal Plate Waste Water Treatment

DTRO Membrane Welding Machine (also can do DTNF) are especailly for making DTRO membranes. The DTRO membrane cushions are sealed by ultrasonic welding from our machine. This welding technology has been proven over several years in different applications and with different membrane types.

Disc Tube Reverse Osmosis Membranes also called DTRO Membranes. Round , Hexagonal and octagonal RO/NF membrane cushion used into the DTRO membrane module for water purification . The membrane cushions are sealed by our ultrasonic welding machine, which has been proven over many years in different membrane types & membrane applications.

1. Production beat: 2-4 pcs / min

2.Machine utilization rate: >92%

3. Qualification rate: ≥97%

4.Voltage: AC 220V single-phase three-wire system

5.Frequency: 50/60Hz

6.Power: 17.5KW

7.Control voltage: 24V

8.Compressed air pressure:>0.6MPa Flow rate: 0.55m3/min

Production Speed: 2-4 pcs per min

Whole Machine Weight: about 330kgs

Empolyment: One person can operate 3 sets machines

Power Supply: Single-Phase Three-wire 220V 4.5KVA or customed

Discharge Mode: automatic discharging and counting

Round Hexagonal Octagonal RO/NF membrane cushion used into the DTRO membrane module for water purification . The membrane cushions are sealed by our ultrasonic welding machine, which has been proven over many years in different membrane types & membrane applications.

The machine can do two kind welding : multil-layer overlay welding or double-layer dislocation welding.

Function Configuration Information:

1. Pneumatic Components: SMC cylinders

2.Electronically Controlled PLC: OMRON Omron

3.Operation Interface: 7″ touch screen

4.Detection Sensors: Keynes, Japan or Otis, Japan

5.Servo Motor: Ankawa ,Japan

6.Line Track: Shangyin, Taiwan

7.Besring: NSK Nippon Ernsk