Standard ISO Certificated M310 Bohler Mold Core Pins For Plastic Mould

Standard ISO Certificated M310 Bohler Mold Core Pin Metal Round Stepped for Plastic Mould

The Description Of Mold Core Pin

Mold Core Pin and core blocks are frequently used for aluminum alloy die-casting to produce net-shape parts and/or to prevent the parts from
shrinkage in thick casting sections. however, for large casting, some other problems such as soldering of Mold Core Pin due to insuffcient cooling,
leakage, etc. may also arise. the authors have studied the heat now from casting to Mold Core Pin under various casting conditions and developed an effcient cooling system. this paper reports the optimization of thin wall Mold Core Pin shape from the perspective of heat now and mechanicals of Mold Core Pin. the optimum cooling channel diameter of the Mold Core Pin should be 70 percent of the outer diameter of the Mold Core Pin. this thin wall Mold Core Pin in combination with high pressure water cooling would eliminate soldering and would give a longer Mold Core Pin life than that of conventional solid Mold Core Pin without internal cooling

Packaging:

Our Advantages:

1. More than 30 quantity own patents

2. Started from 2006, more than 15 years experience

3. Well-Known equipment in the workshop for guarantee the precision

4. Range of strict quality control system before delivery

5. Zero complaint from clients after using the components

6. One stop solution for the clients from designing to manufacturing

7. High attention with the package security to deliver

8. Non standard mold components are avaliable

9. Low rate to do over again

FAQ:

Q1: Which Kind Information Need For Quotation ?
A: 1.Product 2D / 3D drawing 2.Product material 3.Cavitation 4.Runner type : cold or hot 5.Mould steel type 6.Mould trial and sample quantity 7.Other special requirements

Q2: I Have A Sample But Dont Have Drawing , What Can I Do ?
A: Please send us some photos of the sample. and you can send us a sample then tell us your idea, we will help to finish the 3D drawing design

Q3: How Do We Control The Mold Processing ?
A: We will send the process report and mold processing pictures every week to the customer

Q4: What Is Your Lead Time ?
A: For injection mold, generally it is 28-60 days as the products structure is different so the leadtime will also be different for injection molding parts, 5-10 days for small order, if more we willscuss

Q5: Didn't Find The Answer You Were Looking For ?
A: Please contact us today with your questions and a team member will get back to you as soon as possible