Functional PDU series power distribution unit
Product Introduction
The functional PDU is designed according to the IEC standard, and is used to supplement the limited output sockets and functions of ordinary PDUs to meet the customized development needs of customers: configure air switches to meet AC and DC high-power input/output, and support single-channel/multi-channel grouping sockets Independent control; support optional functional modules: transparent open junction box, temperature detection module, air/hydraulic switch assembly, meter module, socket execution module, lightning protection module, fuse, etc.; support single-phase AC, three-phase AC, - 48V DC, 240V HVDC, 336V HVDC and other application scenarios; support access to 8 sensors including temperature and humidity, door contact, water immersion, smoke, infrared, and wind speed. | ![]() |
Feature
![]() |
|
application
| ![]() |
Parameter
PDU |
Parameters | |
input | Input type | AC single phase, AC three phase,-48VDC,240VDC,336VDC |
Input mode | Transparent open type junction box,power cord, cable, industrial connector, socket etc. | |
Input voltage range | 100-277VAC/312VAC-418VAC/11VDC-240VDC/-43VDC- -56VDC | |
AC input frequency | 50/60Hz | |
total load current | MAX 63A | |
Output | Storage temperature | -40 - +70 |
Relative humidity | 5-95% (No condensation) | |
Atmospheric pressure | 70kPa - 106kPa | |
Working altitude | No more than 4000M | |
Environmental | Working temperature | -10 - +75 |
Storage temperature | -40 - +80 | |
Relative humidity | 5-95% (No condensation) | |
Working altitude | No more than 4000M | |
IP rating | IP20 | |
Protection | input protection module | Circuit breaker, lightning protection, leakage protector, temperature insepction module (optional) |
Output protection module | Circuit breaker, fuse box, fuse(optional) |
Certification
Case
Factory