Hot Runner Injection Molding is a manufacturing technique utilized by our company to create top-notch plastic components. This method involves injecting melted plastic into a mold through a heated channel system, known as the hot runner system. This system ensures that the plastic remains in a molten state throughout the injection process, eliminating the need for runners and reducing material wastage.

Hot Runner Injection Molding provides numerous benefits. Firstly, it allows for quicker cycle times by directly injecting melted plastic into the mold without the need for cooling runners. This boosts productivity and decreases lead times. Moreover, the elimination of runners helps to lower material expenses and reduce environmental impact.

Our company makes use of cutting-edge hot runner technology to have precise control over the injection process. Equipped with temperature sensors and controllers, the hot runner system enables accurate temperature management and consistent part quality. This technology also makes it easier to manufacture intricate parts with tight tolerances.

Hot Runner Injection Molding is widely used in industries such as automotive, electronics, and consumer goods. It is especially well-suited for large-scale production runs and projects that require high precision and efficiency.

Brand: Chitwing
Country of Origin: Guangdong, China
Mold Base: Customized
Gate: Pin point gate + side gate
Type: Three-plates mold
Tool Life: 500,000 shots
Standard: LKM
Cavity & Core Steel: Hardened (1*1/S136)
Injection/Runner Type: Hot runner
Surface Finish: Outer surface polished to 800# sandpaper, inner surface EDM with VDI21#, and surface hardened to a minimum of 600HV
Mold Size: 450 x 500 x 566mm (net weight 600kg)
Part Size: 212.45 x 124.68 x 7.58mm (net weight 12g)
The Chitwing mold, originating from Guangdong, China, is a customized mold with a pin point gate and side gate. It is a three-plates mold with a tool life of 500,000 shots. The mold follows the LKM standard and is made of hardened cavity and core steel (1*1/S136). It utilizes a hot runner injection/runner type and has a surface finish that includes outer surface polishing to 800# sandpaper, inner surface EDM with VDI21#, and surface hardening to a minimum of 600HV. The mold size is 450 x 500 x 566mm with a net weight of 600kg, while the part size is 212.45 x 124.68 x 7.58mm with a net weight of 12g.