6-8mm Three Point Internal Micrometer Measure Small Holes
Quick Detail:
1. Three-point micrometer centering self and aligning self.
2. Measurement can be taken closer to the bottom of the blind bore.
3. Range 2-6mm/0.08-0.28″: two points models for very small holes.
4. Carbide-tipped contacts points, ratchet stop.
5. Supplied with setting rings.
6. Supplied in fitted case.

Description:
The three-point micrometer features with self-centering three-point contact points for accurate bore measuring,
this structure allows the micrometer to be more accurate and stable when measuring blind and through holes.
With three-point contact, the errors in the measurement process can be avoided more effectively,
thus improving the accuracy of the measurement results.

In this series, we supply small measuring range including 2-2.5mm, 2.5-3mm, 3-4mm, 4-5mm, 5-6mm,
with graduation 0.001mm. Mainly used for very small holes measurement.

It can center self and aligning self, the measured values are significantly more accurate than those obtained with a caliper.

Specification:
Metric:

Inch:

Precautions:
1. Make sure that the measuring claw and scale of the three-point inner micrometer are clean and dust-free
so as not to affect the measurement accuracy.
2. Calibration should be performed before use to ensure that the micrometer has a correct initial reading.
3. After use, the micrometer should be cleaned and coated with a layer of anti-rust oil to prevent rust.
4. Store the micrometer in a dry, ventilated, dust-free environment to avoid moisture and heat.
5. The three-point internal micrometer is not suitable for measuring holes with rough or burr surfaces,
so as not to damage the measuring claw or affect the measurement accuracy.

Applications:
Three-point internal micrometer is mainly used to measure the holes, slotted hole, etc. It is widely used in machinery manufacturing,
automobile manufacturing, aerospace, electronic components and other industrial fields. With its high measurement accuracy,
easy to use and simple operation, it has become one of the important tools for measuring bore diameter.
FAQ:
1) Who are we?
Deko Corporation mainly dedicate to the development, manufacture and marketing of KM brand precision measuring tools
in China mainland.

2) What products do we carry?
Dial indicators, micrometers, calipers, bore gauges, height gauges, dial thickness gauges, depth gauges, bevel protractors,
gauge, blocks, level, etc.

3) What are the terms of trade?
We support FOB, CFR, CIF, EXW.

4) What are the forms of payment?
We accept T/T, L/C, D/A, D/P, PayPal, Western Union.

5) Do we accept customization?
Yes, OEM is available.

6) How about after-sales service?
One year warranty for all kinds of products.
If you find any defective accessories when receive goods, we will ship your news parts or new product to replace.
As an experienced manufacturer, we have very strict calibration and inspection team, you can rest assured of our product quality.