China made Nitrided Coated Core Pin Die Casting Mold Parts 1.2344 Material

An Mold Core Insert is another mold component that is typically used as a cost saving

measure. the mold uses the same Mold Core Insert and Cavity Insert, but one Mold

Core Insert is swapped for another. Different Mold Core Inserts can be used to create

different shapes. thus, you can use the same mold to create similar parts simply by

switching inserts. In the upper-right figure, an insert needs to be created for a square

cut in the bottom inset of the reference model. The resulting insert mold volume is

shown in the lower-left figure. However, the model could have a design variation

where, rather than a square cut in the bottom, there is a round cut in the bottom,

as shown in the lower-right figure. In this case, you can create a different insert

mold volume, while you use the same core and cavity

You can also use Mold Core Inserts in areas that are difficult to machine

Because mold components are ultimately created from mold volumes,

you can use sketch-based features to create Mold Core Insert mold volumes

in the mold model

Our Services
1. Specialized in precision mold part ,inquiries will get highly attention and

be prompt response.(within 24 hours).
2. Advanced facilities and experienced engineers, rich experience in mold parts.
3. Guaranteed quality, superior material quality compared to all other.
4. Customer oriented, efficient solution to control the cost for our client.
5. One-stop service, any questions can be solved at the first time by us.
6. Each part has been got 100% inspection before shipment.

Main products
1.Core pin,cavity pin,insert pin etc
2.HSS punch ,Precision punch ,Special-shaped punch
3.Ejector pins,ejector sleeve,two-stage ejector pins etc
4.Guide pillars ,Guide bushings ,Guide post set
5.Slide Core Units,Latch locks,locating Series

Our adavanges
1. Clean and tidy workshop.
2.Strick and serious manangement, skilled and expericenced technicians.
3. Various raw material(imported and Chinese) to meet different needs of

customers.
4.Equipment of high pricision.( Surface grinding,Sodick Wire-cutting.

drilling machine).
5.The QC go along with all the production processes in our factory.
6. You can use English or Japanese for cummunication

Payment Terms
T/T,Paypal,Western Union,50% deposit, balance before shipment is

available

Package
PE bag with anticorrosive oil,foaming film with carton,or wooden box

according to customer's requirement.

Delivery
Delivery time is usually 7-15 working days for type of ejector pin,

specific time is according to quantity.

Shipping
We ship using express such as DHL, UPS, FEDEX etc. or according

to customer's requirement . It takes about 3-5 days to arrive your front

door, and proof of shippments are provided with a shipping or tracking

number. And we ship by occean shippment for larger quantity items,

it will be economic for customers.

You are always welcome to send us the inquiry and all the questions

that you are interested in, I will reply you as soon as possible.

Inclined guide post mold accessories

Q:Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available.