Single Phase Smart Energy Meter with STS Prepaid Keypad, GPRS/4G module
The CA168-CS23 represents a cutting-edge, upgraded version of the smart energy meter that combines precise metering capabilities with wireless communication and control features based on contractual principles. This meter is designed for single-phase, two-wire systems and supports both prepayment and credit modes. The payment method can be modified remotely through commands from a central server. The device provides comprehensive metering information, including voltage (V), current (A), power factor (PF), total consumption, balance, and the last five successfully entered tokens. It also collects load profile data at predefined intervals.
With GPRS/4G connectivity, the CA168-CS23 facilitates real-time data transmission to the central server, enabling utilities to remotely monitor, audit, and control the meter. This wireless approach enhances both service providers' and consumers' experience by offering flexibility and convenience.
Key Features
Advantages for Utilities
Specifications:
Nominal voltage Un | 220/230/240 V |
Limited voltage | 70%~120%Un |
Nominal frequency fn | 50-60Hz+5% |
Basic current(Ib) | 5-10A |
Maximum current(Imax) | 60-100A |
Starting current(Ist) | 20mA |
Active energy constant | 1000imp/kWh |
Accuracy as Active energy to IEC62053‐21 | Class1.0 |
Power consumption in Voltage circuit | <2W <8VA |
Power consumption in current circuit | <1VA |
Operating temperature | 25℃ to+70℃ |
Storage temperature | 40℃ to+85℃ |
Insulation level | 4kV rms for 1min |
Impulse voltage withstand | 8kV, 1.2/50 μs |
Air discharge | 16kV |
Immunity to HF fields |
|
80MHz to 2GHz with load | 10V/m |
100kHz to 1GHz without load | 30V/m |
Fast transient burst test | 4kV |
Meter shell Protection Rate | IP54(IEC60529) |
Insulation System Classification | Protective Class II |