Charcoal making line Charcoal carbonization furnace from nut shell ,coconut, walnut, hazelnut
The Introduction of wood carbonization furnace:
The hoisting type wood carbonization furnace manufacturerd is mainly used to carbon the briquette made by the briquette making machine or the original wood log, bamboo, coconut shell, rice husk, peanut shell, palm fiber, etc into charcoal.
Carbonizing furnace for charcoal is energy-saving type which includes one outer stove, three set of inner stoves, smoke recycling system and the 3 ton hoisting tools.
Structure:
♦ Ourter stove
♦ Inner stove
♦ Cover
♦ Hoist
♦ Purify system
Procedures on inputting the raw material
1. Open the cover of the furnace
2. Hoist the inner stove out of the furnace and open the cover of inner stove, then make it into a tilt for easy
material loading.
3. When loading1/2 material, put one high temperature resistant steel wire mesh and continuous adding material above the steel wire mesh.
4. After finish inputting the material, close the cover of inner stove and hoist it into the carbonization furnace. Then put some clay or sand among the inside stove and outside stove for insulation.
Advantages of wood carbonization furnace
1. Easy operate and maintain.
2. High carbonization rate, With smoke removal equipment. It is environmental friendly.
3. 8 hours per stove and work continuously.
4. The combustible gas generated during carbonization process will come down along the pipes to the lighting hole to become fuel to heat the stove.
5. With hoisting tools, which can hang the inside stove very easily.
1.Warranty for 12 months.
2.All the machines will be checked Ok before delivery
3. We can appoint specialized after-sale service staff to your country for installation and debugging the equipment.
4.Train operating personnel.
5.We provide the video to guide the customer how to operate the machine and provide technical support .
6.You can call us at any time if the machine break down during the operation. If the problem can't be solved, we will send the engineers to your country to repair the machine for you.
1.What is the carbonization rate?
This carbonization rate can reach to 99%.
2.Could you offer complete Wood Charcoal machine production line?
Yes, we will allocate suitable production line according to your special requirement, such as crusher, Gasifier Equipment, Dust-Removal Device, Gascleaner, Auto-feeding Conveyor,Cooling and Discharging Conveyor,Manual automatic dual-use electric control cabinet,etc.
3.Where is your factory located? How to get there?
We are located in Zhengzhou city, Henan province, China, you can come here by air.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO
We will pick you up at airport.Welcone to visit our factory.
4. Why it is no pollution ?
Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.
When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again.
5. How many containers will it load?
One 40 feet container and one 20 feet container.