CNC Folding Pipe Bending Rolling Machine Automatic W11s Series

Product Features:

The straight edge length can be set freely
While pre-bending,the upper roller press to pre-bend
The upper roller is drum-shaped,and the lower roller coordinates with carrier roller,

which can roll ideal products from thin to thick plates.
Mechl drive or hydraulic motor drive (Adopt energy-saving double drive inmechanical

drive when the thickness exceeds 50mm
NC or CNC
W11 series series on roller Universal Rolling adopts hydraulic drive on roller lift and

horizontal movement (mechanical transmission), by the roller drive, electric centralized

control operating system, you can complete a feeding plate ends pre-bending and rolling

drum , curved workpiece work, but also on certain sheet metal shaping leveling, direct

pre-bending, easy, and material effect, configure the NC system control, increased

automation. It is widely used in high precision.

Characteristics:

1. Easy to operate,rolling ways to diversify.
2. Simple movement(horizontal and vertical movement of synthetic campaign to lift the

arc trajectory),a small fault.

3. Plate rolling process,always in a state of clamping,the deviation will not slide.
4. The work of the three-roll,rollthe same track.
5. Rollers work in any state to release the space work out ,no need to reach the top position.
6. Microcomputer control, synchronization accuracy of ±0.2mm.

Technology And Innovations:

It mainly reflects in the following aspects
1. Built-in Pressure cylinder: Pressure cylinder setting on the lathe bed can solve the piston

rod damage problem that the work-piece'roll scale accumulate in the process of bending due

to cylinder rod exposure.
2. Strengthened cone bending package: There is a cone small-mouth slowing device set on

the top and bottom working roller's bearing block. The electrical system can control the working

roller's inclinayion and maintain the top roller's balance. This machine can meets the

requirement of small diameter, large cone angle bedding.
3. Hydraulic advance release pressure system: Through the special design of hydraulic system

and working pressure checking, the machine can be unload on the condition of high pressure to

avoid the problem of "water hammer", work-piece bouncing compact on piping.
4. Clean human-machine interface: Working pressure of hydraulic and each cylinder, motor

working state, displacement of sensor will be displayed on the screen in form of instrumentation

control.

The power failure of each valve, prompting of each soft and hard limitation, overload alarming,

oil temperature alarming, prompting of cooling also will be displayed on the screen.

Technical Data:

Service:

Standardization of Service "212"
response in 2 hours
provide solution in 1 day
solve complaint in 2 days
Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer's
factory for installation and preoperation of machines.
Training Service
Our technician is available to your factory and offer training of how to use our machines. As well,

you may send your technician to our company to learn how to operate machines.
Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same

as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's
materials for test. After making sure machine is the best performance, then make shipments.

More information please contact us:

wxmachinery@163.com

WhatsApp:+86 13961729519

Skype:zouqicheng

QQ:2308574039

download brochure here

rolling machine.pdf

Machine Photo: