Order Number | Pipe Foot Name | Description |
---|---|---|
1 | VDDHV | Source |
2 | GND | Ground |
3 | NC | Not Connected |
4 | NC | Not Connected |
5 | NC | Not Connected |
6 | NC | Not Connected |
7 | OUT/OWI | Output |
8 | NC | Not Connected |
Parameter | Sign | Minimum | Representative Value | Maximum | Unit |
---|---|---|---|---|---|
VDDHV Voltage | VDDHV | 4.5 | 5.0 | 5.5 | Vdc |
Working Pressure | P amb | 30 | 300 | kPa | |
Working Temperature | T opr | -40 | 125 | ℃ |
Parameter | Sign | Minimum | Representative Value | Maximum | Unit | Remarks |
---|---|---|---|---|---|---|
VDDHV Voltage | VDDHV | -24 | 28 | V | At 70℃ / 1 hour | |
-30 | 36 | V | At 70℃ / 1 min | |||
Analog Pin Voltage | VOUT | -0.3 | 5.3 | V | 25℃ , VDDHV > 5V | |
Simulation of Pin Currents | 25 | mA | ||||
Overload Pressure | P proof | 400 | kPa | |||
Bursting Pressure of Tank Shell | P burst | 500 | kPa | |||
ESD | HBM | ±2 | kV | |||
CDM | ±500 | V | ||||
Storage Temperature | T stg | -40 | 150 | ℃ |
Parameter | Sign | Minimum | Representative Value | Maximum | Unit | Remarks |
---|---|---|---|---|---|---|
Output Voltage Range | VOUT | 0.01 | 4.91 | V | ||
Output Pressure Accuracy | A ccp | -1% | 1% | %F.S. | @0℃~85℃ | |
-1.5% | 1.5% | %F.S. | @-40℃~125℃ | |||
Electric Reset | VDDHV por | 2.5 | V | |||
Typical Working Current | I avdd | 3.1 | mA | |||
Voltage Output Noise | V rms | 0.5 | mV | |||
Output to Drive the Load Resistance | R load | 1 | kOhm | |||
Output Drive Load Capacitor | C load | 150 | nF | |||
Short Circuit Current Limit | I short _lmt | 10 | 25 | mA | Output is short-circuit to either VDDHV or GND | |
Upper Limit Clamp Voltage | V clamph | 0.01 | 2.5 | V | @VDDHV = 5V | |
Lower Limit Clamp Voltage | V clampl | 2.5 | 4.91 | V | @VDDHV = 5V | |
Pinch Voltage Error | Δ V clamp | -40 | 40 | mV | @VDDHV = 5V | |
Power Time | T UP | 10 | ms | |||
Step Response Time | T RESP | 0.8 | ms | |||
EEPROM Data Maintenance | T live | 10 | years | @125℃ |