CAFS1000A The flow rate range is 0-60m/s, and the impact resistance is 100g

Product Features

■High accuracy (±2.0% F.S accuracy)
■Linear output and no temperature compensation required
■Long-term stability with minimal zero drift
■Fast response time (20 ms response time)
■The flow rate range is 0-60m/s, and the impact resistance is 100g
■Solid-state sensing core (no surface voids or fragile membranes), resistant to clogging and pressure shocks
■Output mode: Analog voltage output
■In terms of reliability, it can be adapted to the measurement of relatively humid gases
■Operating temperature: -40°C to 125°C, Storage temperature: -40°C to 125°C, humidity: 0 to 100%RH
■The sensor is resistant to condensation

Product Applications

■Automobile■Various locomotives■Industry■Chemical■ Mechanical and electrical equipment

Product Description

The CAFS1000A series of MEMS air flow sensors (i.e., air flow meters) are used in modern automotive electronically controlled fuel injection systems (EFI) with general safety.
It is installed in the air intake channel between the air filter and the throttle body, and is used to measure the amount of air drawn into the engine, and its output signal is used as the fuel injection of the automobile engine.
The main parameters in the system that control the amount of fuel injection determine the dynamics, economy and emission performance indicators of the engine. EFI engines are designed to work in a variety of operations.
In order to obtain the optimum fuel concentration mixture, the amount of air drawn into the engine must be accurately measured at each moment, and the fuel injection must be calculated and controlled as an electronic control unit.
The main basis for the amount. Therefore, automotive air flow sensors play an extremely important role in saving energy consumption and controlling pollutant emissions in modern vehicles.
CAFS1000A series products have been verified in the automotive and related industries for many years, and have been fully able to meet the high reliability, high stability, and high stability of automotive-grade use.
High accuracy and low cost. The application and promotion of products will be very broad.