Digital Dial Gauge Vacuum And Fuel Pump Tester Gauge Kit , Fuel Pump And Vacuum Tester Gauge SG-HS2217
Vacuum/Pressure Gauge Kit SG-HS2217
Technical Data:
- Basic Accuracy: +/- 3%
- Range Of Measurement:3—20psi,30inhg
- Working Condition:-20℃—60℃,Below 95%Rh, Normal Atmosphere
- Storage And Transportation Conditions:-30℃—70℃
- Battery Specification:6f22 9v Laminated Cell
- The Minimum Resolution Of Light Band: 3.3 Psi Major Light Band Graduations.
- The Corresponding Time Of The Light Band ≤ 1s.
Features
- Main screen: Showing the current pressure value.
- Test mode display symbols: When showing“Full Scale 20 PSI” means the tester is in pressure test mode when showing“Full-Scale 30inHgVAC” means the tester is in the Vacuum test mode.
- Light band: It changes as the pressure changes, with the positive pressure it moves from left to right and the vacuum pressure it moves from right to left.
- ON-OFF: The button of power on or power OFF. In the absence of any operation, about 6 minutes automatic shutdown.
- The Low-voltage symbol.
- The pressure unit of the current state.
- CLEAR/LIGHT: The initial value will be reset by pressing the button briefly. Keep pressing the button for 3 seconds the backlight will be turned off or on.
- UNIT/MODE: The unit of measurement will change by pressing the button briefly: PSI, kPa,bar,inHg,cmHg.Keep pressing the button for 3 seconds, it will show“Full Scale 20 PSI” then keep pressing the button for other 3 seconds,it will show“Full-Scale 30inHgVAC”


