The cable-fault detector is a testing device of good integrity. It can test on the High Resistance Flashover Fault, Grounding High and Low Resistance Fault, Short & Off Circuit on the Cable Fault and Poor contact and etc. If being equipped with sounding method and locating instrument, it can exactly detect the fault point. Furthermore, it especially applies to test for
various power cable and communication cable.
Scope of application and using purpose
The instrument can test all kinds of electric cable(voltage of 1KV-35KV) and the Short Circuit, Grounding, Leakage of High
Resistance. High Resistance Flashover, Out Line and Bad Contact fault on the local cables, frequency modulation communication cables, coaxial cable and metal aerial cables. It also can test the length of cable and the spread velocity on the cable.
The longest testing distance is 32KM (100KM for the open-wire line)
Testing .dead zone is 1M.
Resolution of reading is 1M
Power dissipation is 5VA
Service condition :
Environment temperature 0℃~+40℃
Terminal temperature -10℃~+50℃
Relative humility 90%RH
Dimension: 225×165×125mm3
Weigh: 2kg
Product Picture