4 Layer Printed Circuit Board Immersion Gold Treatment Green Solder Mask

• Main Features:

1 4 Layer Printed Circuit Board PCB .

2 Immersion Gold treatment, gold thickness 2u'.

3 FR4 substrate material, tg150 degree.

4 Min line space and width 4/4mil.

5 Copper thickness is 1 oz on each layer, 35 um on each layer.

6 Green solder mask and white silkscreen.

7 ROHS, MSDS, SGS, UL, ISO9001&ISO14001 Certificated

• Our Product Categories:

1 FR4 substrate PCB : 2 Layer Printed Circuit Board, 4 Layer PCB, 6 Layer PCB, 8 Layer PCB, 10 Layer PCB, 12 Layer PCB, 14 Layer PCB, 16 Layer PCB, 18 Layer PCB, 20 Layer PCB, 22 Layer PCB, 24 Layer PCB, HDI PCB, High frequency PCB.

2 Aluminum Substrate pcb: 1 Layer Aluminum PCB, 2 Layer Aluminum PCB, 4 Layer Aluminum PCB.

3 Flexible PCB: 1 Layer FPC, 2 Layer FPC, 4 Layer FPC, 6 Layer FPC

4 Rigid-Flex PCB: 2 Layer Rigid-Flex PCB, 4 Layer Rigid-Flex PCB, 6 Layer Rigid-Flex pcb, 8 Layer Rigid-Flex PCB, 10 Layer Rigid-Flex pcb

5 Ceramic substrate pcb: single Layer Ceramic pcb, 2 layer ceramic pcb

• Our Capabilities:

1 Solder mask color: green solder mask, blue solder mask, white solder mask, black solder mask, matte black solder mask, red solder mask etc

2 Copper thickness: Half OZ, 1 OZ, up to 8 OZ

3 Min hole size: 0.15mm for mechnical hole, 0.075mm for laser drilling hole

4 Min line space and width: 2/2 mil for prototype, 2.5/2.5mil for batch production

• FAQ:

Q1: What is a 4-Layer PCB Stackup?

A1: A 4-layer PCB Stackup is a multilayer PCB that consists of multiple layers of copper and insulating materials stacked one above the other. For maximum efficiency and minimum losses and EMI, it is important to plan the right stack up of layers before starting the fabrication process. 4-layer PCB is the most common stack-up arrangement used in modern electronics.

A 4-layer PCB stack up consists of top and bottom layers, a core (copper-clad layer), and an insulating layer also called prepreg made of a dielectric material like glass fiber/weave cloth. The top and bottom layers are made of copper foils, which are then laminated and etched to create slots for mounting the components. The core layer is made up of prepreg sandwiched between two copper foils. These top and bottom layers, core layer, and prepreg are bound together in such a way that no air is trapped between them.

As mentioned in the previous paragraph, the 4-layer PCB comprises the top and bottom layers, prepreg and a core layer. Now, the top and bottom layers, made of copper foils are used as signal planes. After lamination, the desired slots are etched for the placement of components and vias, which are electroplated holes connecting different planes in the PCB. The top side of the core is used as a ground plane, while the bottom side is used as a power plane. To reduce EMI and crosstalk, it is advisable to place the ground plane above the power plane. This will help in the reduction of overlapping and interference of the magnetic fields created by the signal and the current planes. The ground plane also helps in routing the return current and dissipation of heat.