Top Printing Corrugated Carton Making Machine Flexo Printer Slotter Gluer Inline

KC-PG consists of automatic printer, automatic folder gluer and auto bundler. It features mobile units,roll to roll transfer or Vacuum transfer. Ink and energy saving function,touch screen and PLC setup.Automatic lubrication system keeps lubricant of all units at the same level.
Intervals adjusted by manual OR PLC and touch screen,Quick save-start order funciton design.
Suitable for corrugated cardboard.


Technologic parameter

1 Feeding unit

1.Continuous or skip feeding is available with counter;

2.Copy sun automation lead edge feeder with strong vacuum transfer for

precise and stable feeding;(made from Guangdong province)

3.Variable frequency drive control for vacuum blower fan for increased

or decreased vacuum suction to match different size cardboard.

4.Feeding roll is made of two-layer rubber,inner layer is soft and outer

layer is hard,this makes inner layer more flexible and surface more

wear-resistant,and reduce the flute damage of the cardboard;

5.Dust remove system with brush and segmented vacuum sheets cleaner;

Self-locked system adopts for adjusting feeding rolls gap,motorized

and PLC control of feeder side guides;

6.Motorized backstop forward /backward and up/down position for easy

and quick adjustment;

7.Main motor is protected from starting up when units are not fully

closed and locked.

2 Printing unit

1.with anilox roller and rubber roller

2.Mounting roller with left and right both of side locking device,let the

mounting position more accurately.

3.Pneumatic clutch is adopted on the anilox roll to:

(1)Make the roll run at the same speed as the main motor when the unit

is printing;

(2)Make the roll stop when the unit is not printing;

(3)Reduce the possibility of damage to the rubber roll and the anilox

roll for inproper operation;

(4)Allow units which are not in use to be washed up while running.

4.Printing register is digitally controlled by motor and PLC

5.Transverse register is also digital controlled by motor and PLC ±10mm

6.Quick set and self locking pull collars.

7.A fixed device of printing register and brake of electromagnetic clutch

is used when the unit is opened.upon closing the unit,the positions are

precisely restored so the unit is ready for production without

adjustment.

8.Cleaning function can be automatically switched to ensure the ink

recycling thoroughly

9.Automatic resetting after cleaning the printer

10.with six units ceramic roller and four units doctor blade.

11.ceramic roller LPI according to customer requirement.

3 Slotting unit

1.Single shaft five blades slotting ,an internal gear adjusts the height

of the carton box and prevents the lubricating oil from spilling or

leaking onto the cardboard

2.The first pre-creasing,the cardboard not be damaged after prepressing.

3.Upper creasing roll covered by anvil ring,so cardboard is not damaged

easily.

4.Slotting bosses move along liner lead rails and are driven by lead

screws for flexible and precise movement.

5.Upper boss and lower boss are coupled to keep the two knives aligned

while moving,which is helpful to prolong service life.

6.Slotting register and height of carton box are digital controlled by

motor and PLC.

7.Transversal movement of the pre-creasing rolls,and slotting bosses’ are

digital controlled by motor and PLC

8.Motorized controls of the slotting bosses caliber.

9.A protective device prevents the slotting knife from crashing when the

height of the carton box is adjusted.

10.Flexible angle cutting knife can cut 3 or 5 or 7 ply cardboard with no

adjustment,easy to operate.

5 Folder gluer

1.sunction feeding type
2.automatic spray adhesive system (imports)
3.left, right,front,back automatic taken together function.
4.computer control automatic changer order,automatic store orders.
5. baffle position,touch screen display.
6.paste head position,touch screen display.

bellow feeding type
1.suction feeding type.

2.automatic accurately count and automatic out
3.front baffle adjustment,touch screen display

4.back baffle adjustment,touch screen display

5.Count out, touch screen display