KC-GT 1450 automatic single face cardboard laminating machine
Technologic parameter
Model |
KC-GT 1300 |
KC-GT 1450 |
Max Laminating Size ( W×L ) |
1300mm*1100mm |
1450mm*1100mm |
Min Laminating Size ( W×L ) |
350mm*350mm |
350mm*350mm |
Economical Speed |
0-9000 sheets/h |
0-9000 sheets/h |
Laminating Precision |
≦+/- 1.5mm |
≦+/- 1.5mm |
Total Power |
12 kw |
12 kw |
Machine Length |
12.5m |
12.5m |
Machine Weight |
6.8tons |
7.2 tons |
FEATURES
- Adopting back pusher , back positioning feeding , equipped with spring side lay and bottom suction system , to make our machine suitable for all kinds of paper , and keep the good characteristics of easy operation and convenient maintain .
- The glue roller adopts high design , match with anilox to glue distributing , the uniformity of coating was improved greatly, increasing the intensity of draping , reduce the cost of customer production .
- The steel roller through the balanced treatment and test , match the tight assembling to make higher stability . And adopting the timing belt and tooth type belt driving , make the machine running with higher precision and lower noise.
- Adopting the liquid control system , automatic gluing , and the glue can be cycle used , avoid glue waste and labour strength .
- Self-developed high-strength feeder with high configuration electric system make the machine running stable and lower failure rate, the electric parts adopt international wide available brand or well-known Chinese brand.
- All material are inspected according to ISO-9001 standard and key parts as the harmonic gear and bearings are imported ones .
This machine bottom paper is suitable for A, B , C, D, E, F flute . It can do 3 layer, 5 layer board to sheet laminating or thick board to board laminating . The surface paper need 200-600 GSM . With top paper advance and alignment function .