Lithium Battery Safety Testing Equipment , Cell Battery Penetration Testing Equipment

1. Product Name: Battery crush and puncture machine

2. Product Model:GX-5067-A

3. Test Methods:

Crush Test:

The battery is to be crushed between two flat surfaces. The force for the crushing is to be applied by a hydraulic ram with a 32mm diameter piston. The crushing is to be continued until a pressure reading of 17.2 Mpa is reached on the hydraulic ram, resulting in an applied force of 13KN.Once the maximum pressure has been obtained it is to be released.

Puncture Test:

Put the battery into the testing room and use the steel needle with the diameter of 2-8mm and speed of 10-40mm/s to penetrate the battery, keep for 5 seconds. The test should be conducted under the condition of 20°C±5°C and ventilation.

4.Test standard:

SJ/T11169-1998(equal to UL 1642:1995),SJ/T11170-1998(equal to UL2054:1997),UL 1642[13],GB8897.4—2002, IEC60086-4:2000

UN38.3, IEC62133, SAE-J2464, GB31241, UL1642, UL2054, YD/T 2344, YD1268, YDB032, IEC60086-4, IEC 62281, MH/T 1052, MT/T 1051

FAQ

Q1: What is the warranty for the equipment?

A1: Warranty for the equipment is 1 year,and free lifelong technical support is available through video email.

Q2: What is the payment way?

A2: T/T ; 50% deposit and 50% before shipment.

Q3: How long the delivery time is?

A3: Generally,the delivery time is about 15-25 days, except for the special customization.

Q4: How to prove your product is qualified?

A4:The production of all equipments are strictly supervised to ensure quality. We have got various relevant certification including ISO,ASTME,DIN,JIS,UL ,BS and so on. What is more, we will carefully make installation and debugging before shipment.

Q5:Is the package strong enough for long-distance shipment?

A5:Sure.We use strong and standard wood case for the package and we will buy insurance for each shipment.