SS304 stainless steel 1.5mm thickness

Heating insulation: 10cm foam polyurethane and fiberglass

Single door with observation window, double insulation and tightness, Effective isolation of heat exchange inside and outside the chamber

Observation window: 3 layer vacuum window, window with electric heating of anti-sweat

Lighting: high brightness light

Test hole for wire feed through: dia. 100mm, with 1 pc stainless cap and 1 pc silicon chock plug

Stainless shelf: 2 layer (the space adjustable)

Test space: 1000*1000*1000mm

Equipment size: 1300*2150*2000mm

Equiped with universal wheels, easy movement.

Vent Port: built in the back for releasing pressure or smoke in case

Pressure relief port: At the side of test chamber, automatic opened if case of internal tank pressure increase

Range: -70~+150℃

accurancy: ±0.01℃

fluctuation: ≤±3℃

Uniformity: ±1.5℃

7" color touch screen PLC set up the program, and display temperature profile

PID+SSR/SCR

Communication interface: RS-232C and 485 for remote control and computer control. can equiped with temperature recorder with extra cost

Smart programmable temperature regulator

Balanced temperature control system

Refrigeration system: air-cooled heat dissipation method

Compressor: fully enclosed compressors from TECUMSEH, France

Refrigeration method: Two-stage compressor refrigeration system (environmental refrigerant R404A)

Security system

Over temperature protector

Zero-crossing gate fluid power controller

Air-burning protection protector

Out- phase Anti-phase protection switch

Compressor high voltage protection switch

Compressor overheat protection switch

Compressor overcurrent protection switch

No fuse switch

Ceramic fast fuse

Line fuse and fully sheathed terminal

Buzzer

3∮, AC380V±10%, 50Hz, 20A
Equipment power: 8KW

Equipment conditions of use

Laboratory temperature range 0~35°C

Relative humidity: no more than 85%RH

air pressure: 86~106Kpa

No strong vibration around

Direct sunlight or direct exposure to other heat sources

Natural drainage facility

Power supply conditions: Three-phase four-wire power supply, reliable grounding