Rubber Bending Rubber Testing Equipment
1. Product Name:Rubber bending testing machine
2. Product Model:GX-5077
3. Product Usage:The machine is mainly used in rubber,leather,synthetic leather and sole materials industry. Check the crack degree after continuous bending test to know the bending resistance.
4.Test Standard:ASTM-D813,D430,BS-903,ISO-132,GB-T13934,T13935,JIS-K6260,HG2873,JIS-K6301
5. Product Structure:
6. Product Panel
7.Technical Parameter:
Sample | (140-150)×(20-25)×6 mm |
Fixture Interval | 19-75mm,57-75mm |
Test Speed | 300±10cpm |
Counter | LED,0~999,999 |
Volume | 550×440×690 mm |
Weight | 78kg |
Power | 1∮,AC220V,3A |
8. Operation Illustration:
① Put the machine on stable floor without violent vibration.
② Cut the sample first: length of 140~155mm, width of 25mm,height of 6.3±0.15mm.
③ Clamp the sample after preparing the sample adjuster.
④ Connect to power(AC220V ,3A), open the switch and the indicator would light.
⑤ Set the bending times by the counter.
⑥ Press the testing button and begin to test.
⑦ The tester would stop automatically when reaching the set testing times.(Press stop button to stop the test when the sample is not prepared or some other problems)
9. Product Picture