Footwear Tester for Rubber Frosting Test and Shoes Materials Anti-hydrolysis Ability Test

1.Product Name:Frosting and Hydrolysis Tester

2.Product Model:GX-5047

3.Product Description:The testing machine is mainly used for the rubber frosting test and shoes materials anti-hydrolysis ability test. By simulating various kinds of climate environment, the machine can test the adaptability changes of the product. It can be widely used in tests of electronics, electrical appliances, metal, rubber, plastic, chemical, building materials, food...

4.Product Features:

①Use different test conditions such as high temperature, low temperature, constant temperature and humidity of the function separately.

②Overall fault indicator including super low temperature, water level, the end of the test and compressor overload.

③Precise counter for user to know the testing time

④Micro-computer temperature controller with PID value,upper and lower alarm and touch setting⑤Anti-hydrolysis test for leather and shoes materials; Frosting test for rubber materials.

5. Product Structure

6. Testing Steps

①Sample Preparation:Size of 50mm x 40mm with thickness of 5m,error within ±0.2mm. The effective sample for detecting sample quantity each time is generally not less than three.

②Testing Conditions:

1.Temperature 60℃,Humidity 92%RH

2.Temperature 23±2℃,Humidity 65%RH

③Testing Steps:

a. Put the sample in the laboratory room for 24 hours.

b. Set the tester with specific temperature and humidity. Put the sample into the tester after the tester becomes stable. Attention that the distance between the samples should be no less than 5mm and the distance between the sample and tester wall should be no less than 70mm.

c. Close the tester door and start timing

d. Observe the test every 24 hours and record the results.

e. Take out the sample and observe the surface changes.

④Testing Result: Shown by frosting degree

0 class-no frosting, no changes on the surface of sample

1 class-slight frosting,few crystal on the surface

2 class-frosting,the surface become light white

3 class-severe frosting, the surface of sample become white and creamy

7.Technical Parameters:

8. Product Accessories

1. Four height-adjustable frames in the tester chamber.

2. Two shelves made of stainless steel.

3. One drain pipe.

4. Operation guidebooks of machine and temperature controller.

9.Product Picture: