Testing Machin Battery Impact testing Equipment Gravity Impact Tester UN 38.3.4.6 & IEC 62133
Model: GX-5066-NE
Equipment description
This machine is suitable for the destructive test of the battery (or battery pack) on the battery subjected to free weight impact from different heights from different heights, resulting in internal short circuit of the battery.
Specification
Drop hammer mass | 9.1kg |
Impact height | 0~1000mm adjustable(usually 610mm) |
Display | PLC Touch screen display |
Electric control | by PLC program |
Height display | Accurate to 1mm by touch screen display |
Impact mode | Lift the hammer to a certain height and release it. The hammer falls freely in the vertical direction |
Horizontal bar | Steel rod with a diameter of 15.8 mm (5/8 inch) |
Inner box material | SUS304 stainless steel, iron and fluorine melted tape attached to the box, insulated, high temperature and flame resistant, easy to clean and maintain |
Outer box material | Cold rolled sheet baking treatment |
Test mode | Single test |
Impact mode | Automatic return, automatic grab |
Lifting method | Electric lift |
Protective device | Safety door switch, Automatic sensor door, the door closed when start to test, opened after testing finished |
Max. Battery tested size | 300*300*100mm (L*W*H) |
Using electric | AC220V±10%, 10A 50Hz 1∮ |
Power | 2.2 kW |
Weight | About 320kg |