Mobile Phone Hard Pressure Tester
This machine can simulate mobile phones and other products, and imitate repeated seat pressure life test. The pressure head is made of a certain hardness of round aluminum bar, and driven by a cylinder. The pressure is adjusted to 17kgf, and the damage degree can be seen after measuring The Times of arrival.
1. Product Name: Mobile phone hard pressure tester
2. Product Model: GX-5630
3. Description:Mobile handsets were not packing, put on the form a complete set of battery on the boot lock the keyboard face, body and fixed bracket of axial vertically placed in the aluminum extrusion of round head 12 cm in length (250 + 10) N, 15-30 times per minute 1000 times, the frequency of the extrusion sample after the function, appearance and assembly shall comply with the requirements of related standard. The hand-held machine with folding, sliding and rotating structure should be tested in its closed state.
4. Technical Parameter:
The maximum test sample | 200cm*10cm, and the height is adjustable within 4cm |
Control mode | PLC touch screen control |
Drive mode | Electric control |
The operating frequency | 10~60 times /min |
Pressure sensor | 100kg |
Alarm time | 5-10 seconds (fixed) |
The pressing head | Made of round aluminum bar |
The machine size | 450*330*500mm |
Weight | 40kg |
Electrical source | AC220/50HZ |
5. Picture