LFXP2-5E-5FTN256 FPGA Chip: Applications, Features, and Product Attributes

Find information here in stock.xlsx

Applications:

The LFXP2-5E-5FTN256 is a Field-Programmable Gate Array (FPGA) chip that is designed for high-performance applications. It is used in various industries, including communications, industrial automation, aerospace, and defense.

Introduction:

The LFXP2-5E-5FTN256 is a member of the LatticeXP2 family of FPGA chips. It contains 5,120 Look-Up Tables (LUTs), 160 Kbits of embedded block RAM, and 12 Phase Locked Loops (PLLs). The chip has a maximum operating frequency of 500 MHz and supports various I/O standards, including LVDS, SSTL, and HSTL. The LFXP2-5E-5FTN256 is designed for low power consumption and has a standby current of less than 12 mA.

Product Attributes:

Product Comparison:

1. Xilinx Spartan-6 XC6SLX75T-2FGG484C
2. Altera Cyclone IV EP4CE10F17C8N
3. Microsemi ProASIC3 A3P250-PQG208
4. Intel Cyclone IV EP4CE22F17C6N
5. Actel ProASIC3 A3P1000-PQ208
6. Atmel ATF1504ASV-15JI84
7. Texas Instruments TMS320DM355ZCE270
8. QuickLogic EOS S3 LP DDR3 SPLD
9. Cypress PSoC5 CY8C5868LTI-LP039
10. Lattice Semiconductor ECP5-5G FPGA

FAQ:

1. What is the maximum operating frequency of the LFXP2-5E-5FTN256?

• The maximum operating frequency of the LFXP2-5E-5FTN256 is 500 MHz.

2. What are the supported I/O standards of the LFXP2-5E-5FTN256?

• The LFXP2-5E-5FTN256 supports LVDS, SSTL, and HSTL I/O standards.

3. What is the standby current of the LFXP2-5E-5FTN256?

• The standby current of the LFXP2-5E-5FTN256 is less than 12 mA.

4. What is the configuration memory of the LFXP2-5E-5FTN256?

• The LFXP2-5E-5FTN256 has on-chip Flash configuration memory.

5. What is the power consumption of the LFXP2-5E-5FTN256 in active mode?

• The power consumption of the LFXP2-5E-5FTN256 in active mode is 0.6 W (typical).