Product Parameter
Part Numbers | NP16LP |
Fittable projector models | For NEC Projector Lamp M260WS M260XS M300W M300XS M350X m361x NP-M311W NP-M361X NP-M361XG NP-M361XJL |
Bulb Type | 210 W |
Life time | 3000 -5000(Hours) |
Packing | Carton box with foam |
Minimum Order quantity | 10 piece |
Connect the video source
Connect one end of the cable to the video output port of the source device (such as a laptop or DVD player) and the other end to the corresponding input port on the projector.
Product Information
The NEC NP16LP replacement lamps are compatiable with M260WS M260XS M300W projectors.The working hour time is:3000-5000 hours,After repalcing our new lamps,the projector performance can be the same of the new original one and improve the effect of projection,and make you feel comfortable while using.
Precautions
Use Proper Tools: Prepare the necessary tools for the installation, such as a screwdriver or lamp removal tool, as specified in the user manual. Using the correct tools will ensure a secure and safe installation.
Remove the Old Lamp: Carefully detach the old lamp by following the instructions provided in the user manual. In some cases, the lamp may be held in place by screws or clips. Gently release the lamp and disconnect any cables or connectors attached to it.
Install the New Lamp: Take the new lamp and align it correctly with the lamp housing. Make sure it fits securely and matches the connections of the previous lamp. Reconnect any cables or connectors that were disconnected during the removal process.
Secure the Lamp Compartment: Once the new lamp is in place, secure the lamp compartment by reattaching any screws or latches that were removed earlier. Ensure that the compartment is sealed properly to prevent any dust or debris from entering.