Product Parameter
Part Numbers | NP24LP |
Fittable projector models | For NEC Projector Lamp PE401H |
Bulb Type | 330 W |
Life time | 3000 -5000(Hours) |
Packing | Carton box with foam |
Minimum Order quantity | 10 piece |
Product Information
The NEC NP24LP replacement lamps are compatiable with PE401H projectors.The working hour time is:3000-5000 hours,After repalcing our new lamps,the projector performance can be the same of the new original one and improve the effect of projection,and make you feel comfortable while using.
Connect the power
Plug in the power cord of the projector into a power outlet. Ensure that the power source is compatible with the projector's requirements.
Bulb warranty
Allow Lamp to Cool: Projector lamps generate heat during operation. It is crucial to allow the lamp to cool down completely before attempting to replace it. This prevents the risk of burns or damage to the new lamp.
Use Proper Tools: Prepare the necessary tools for the installation, such as a screwdriver or lamp removal tool, as specified in the user manual. Using the correct tools will ensure a secure and safe installation.
Access the Lamp Compartment: Locate the lamp compartment on your projector. The exact location may vary depending on the projector model. Usually, it is accessible from the top or bottom of the projector or through a side panel. Remove any screws or latches that secure the compartment.
Remove the Old Lamp: Carefully detach the old lamp by following the instructions provided in the user manual. In some cases, the lamp may be held in place by screws or clips. Gently release the lamp and disconnect any cables or connectors attached to it.