DT01481 Hitachi Projector Bulbs

Hitachi Projector Bulb DT01481 For Projector CP-300WN CP-AW2505 CP-AX2503 CP-AX2505 CP-BX301WN

The DT01481(50X50LUHP225/150W 0.8 E19.4 Extra) Projector Lamp from Hitachi for the original lamp in the CP-300WN CP-AW2505 CP-AX2503 CP-AX2505 CP-BX301WN CP-CX250 CP-EW250 CP-EW250N CP-EW300 CP-EW300N CP-EW301N CP-EW301NJ CP-EW302 CP-EW302N CP-EW302WN CP-EW330N CP-EX250 CP-EX250N CP-EX251N CP-EX252N CP-EX300 CP-EX301N CP-EX301NJ CP-EX3030WNJ CP-EX400 CP-EX400N CP-EX401 CP-RX93 CP-W3042WN CP-WX3030 CP-WX3030WN CP-WX3041WN CP-WX3042WN CP-WX3530WN CP-WX3541WN CP-WX4041WN CP-X2530 CP-X2530WN CP-X2541WN CP-X2542WN CP-X3030 CP-X3030WN CP-X3041WN CP-X3042WN CP-X3541WN CP-X4030WN CP-X4041WN CP-X4041WNJ CP-X4042 CP-X4042WN HCP-K28E TW-2505 projector. Its estimated life is 5,000 hours in a compatible projector's Normal Mode and 10,000 hours in Eco Mode. Our team provides the best quality products, to provide customers with 100% satisfaction quality service.

Specifications:

If you want your Projector Lamps work longer, please Note:
1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or
while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters
should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.